Product parameter
Product name -- MiJIA Inflatable treasure 2 Pro
Product model --MJCQB07PQW
Inflation pressure -0.2-10.3 bar / 3-150 psi
Working temperature --- -10℃-45℃
Rated input --5V=3A
Rated capacity --2500mAh
Rated energy --27Wh
Charging time -- about 3.5 hours
Product size -- about 152 × 100 × 63mm(bare machine size, without high pressure gas pipe)

Product Features
45 seconds of rapid gas replenishment
LED lighting+vehicle emergency lighting
Can replenish 16 tires
Tire repair speed 205, tire 2.0 → 2.5 bar, approximately 45 seconds
Empty tire speed 205 tire 0 → 2.5 bar for approximately 3.5 minutes
The battery life is about 3.7 tires
Inflation progress display
Working voltage 10.8V
USB-C charging interface
Maximum pressure 150psi

*45 seconds to complete tire aeration: under full charge, in car mode, the aeration time of 205/55R16 automobile tires from 2.0 bar to 2.5bar is about 45 seconds (±10%).
*16 car tire replenishment: under full charge, car mode, 205/55R16 car tire replenishment, from 2.0bar to 2.5bar, a total of 16 replenishment can be completed.
* Inflation speed increased to 2.2 times: Under the condition of full charge, the car mode, the car tire of 205/55 R16 is inflated from Obar to 2.5bar, the inflation time of Mijia
Inflatable Bao 2 is about 8 minutes, the inflation time of Mijia Inflatable Bao 2 Pro is about 3.5 minutes, and the inflation speed of Mijia Inflatable Bao 2 Pro is about 2.2 times the speed of Mijia Inflatable Bao 2.
*3.5 minutes to complete empty tire inflation: under full charge, car mode, car tire inflation of 205/55 R16, from Obar to 2.5bar, inflation time is 3.5 minutes (±10%).
*138 basketball inflation: In full charge state, ball mode, for No. 7 standard basketball inflation, from Opsi inflation to 8psi, a total of 138 inflation can be completed.
*30 road bike tires: under full charge, custom mode, inflate road bike tires (700x23C), from Opsi inflation to 80psi, a total of 30 times can be inflated.
*±1psi accurate detection of tire pressure: to the 1L gas tank with precision 0.1psi digital pressure gauge, when the inflation stops and the value is stable,
the difference between the displayed pressure value and the displayed pressure is <1psi.

Q&A
1.Q: Mijia Inflatable Treasure 2 Pro inflation speed is slow how to do?
A: You can perform the following operations:
1, check whether the power is sufficient.
2. Check whether the gas pipe leaks.
3. Check whether the connecting parts at both ends of the trachea are tightened.
2.Q: Mijia Inflatable Treasure 2 Pro has been turned on but cannot be inflatable how to do?
A: You can perform the following operations:
1, check whether the power is sufficient.
2. Check whether the current tire pressure is higher than the preset value.
3.Q: Mi Jia Inflatable Treasure 2 Pro can not adjust up or down the preset pressure how to do?
A: Check if you are in an incorrect inflation mode Select Custom mode to adjust the preset values in the range of 3-150psi.
4.Q: What if the Mijia Inflatable Treasure 2 Pro is normally inflatable but the pressure is displayed as zero?
A: Check as follows: Confirm that inflatable products, balloons and other low-pressure inflatable products are not within the measurable range of the equipment.
5.Q: What is the reason why the inflatable treasure has automatically shut down after twisting the air nozzle?
A: Mijia Inflatable Treasure 2 Pro will automatically shut down after 3 minutes of no operation, long press the start and stop key to start again.
6.Q: Mi Jia Inflatable treasure 2 Pro power indicator is not bright after charging?
A: There may be quality problems with the adapter or charging cable. It is recommended to replace the charging cable and adapter that comply with safety regulations and charge again.
7.Q: Does Mijia Inflatable treasure 2 Pro need to be idle for a long time without charging?
A: It is recommended to charge it at least every three months.
8.Q: Why does the seal ring fall off when Mijia Inflatable 2 Pro inflates the road bike?
A: Because the tire pressure of road bicycles is relatively high (some tire pressure may reach 120psi), the air pressure between the inner seal ring of the nozzle and the valve core is also high, and the air nozzle is quickly rotated under high pressure. Due to the short pressure relief time, the inner seal ring of the nozzle is likely to be pushed out by high pressure. When pumping the road bicycle to more than 80psi, it is recommended to operate slowly during the process of pulling out the air nozzle, and then pull out the whole after the air pressure value shows that the inflatable bag has dropped. If the seal ring falls off during use, it can be manually installed back without affecting the next use.